CEMENT REMOVER

By using CLEANING CEMENT REMOVER (Cement remover) it is easy to remove cement tissues, cement residues, mortar residues, rust and lime-stone depositions. It can be equally applied on acid-resistant quarry stones, cast stones, ground bricks, concrete, clinker and traditional brick surfaces, ceramics, floor tiles, glazed tiles and floor tiles.
It is practical to wet the absorbent surfaces before cleaning. The product can be applied with paint brush or painting cylinder. After 1-1 minute, rub the surface with a scrubbing brush and rinse it down with plenty of water (Do not let the product get dry on the surface!). If necessary, repeat the procedure several times. One liter of the product is sufficient for cleaning 4-5 square meters if applied on ground bricks, clinker bricks and cast stones. In case of glazed surfaces, tiles, floor tiles and clinker surfaces, it is sufficient for cleaning of 10-15 square meters one time. Attention! The product is corrosive; therefore, you have to take care of acid-sensitive surfaces. While using, wear rubber gloves and protective glasses. It should not splash into the eyes, on the skin or on clothes!