WET EFFECT

With the application of the product, the view of the treated building materials changes as if they were wet, their colour deepens, darkens. Together with the change of the colour, the surface of the treated building materials become impregnated, thus it protects against damages caused by moisture. It can be applied on all kinds of mineral-based absorbent surfaces (natural stone, artificial stone, bricks, decor bricks, paving tiles, concrete, etc.). Due to the components of the material, it protects against damaging effects of the UV radiation. It is enough to apply the material in one layer. Be careful to spread it equally. It is recommended to perform the application with a sponge, brush or painting cylinder. It can be applied with a spray gun as well. The product is ready for use; it needs not to be tempered. If it is still necessary, apply white spirit in a proportion of 10 percent at the most. 1-2 minutes after the application, rub through the surface with a sponge so that we can ensure equal spreading and soak up the excess. If necessary, it can be applied in more layers as well; however, usually one layer is enough. In case of application on walking surfaces, do not step on the treated surface within 24 hours. The complete drying happens within 48-72 hours.